HDC
Getting the most from a single source.

Z-Vent Single Wall Pipe

Part Number: 2SVEPWC(F)(03-05), 2SVEP(06-24)
  • Gasketed connections
  • Fusion welded pipe seams
  • No sealant required, no cure time, or no call backs
  • Air tight seam, smooth finish, better fit
  • Metallic special gas vent single wall male end can be cut to length on sit saving time and money.
  • Single and double wall, manufactured in diameters from 3" up to 24"
Available in diameters 3" up to 24in and standard lengths up to 10ft (3in and 4in diameter only). Pipe can be cut to length. The female end of each Z-VENT component incorporates a Double Fail Safe self sealing gasket. Examine all components to ensure that gasket integrity has remained during shipping. Gaskets must be in proper position or flue gases could leak resulting in carbon monoxide poisoning. The installation shall be in accordance with the manufacturer's installation instructions.

See Z-Vent Dimensional Data for a complete list of parts.
Z-Vent Single Wall Pipe
Z-Vent Single Wall Pipe
Home| Company| Quotes| Dealer Locations| Tradeshows| FAQs| Videos| Contact Us| Terms & Conditions
The information provided within is for informational purposes only. We have made every effort to ensure the accuracy of the provided information and assume no responsibility for any loss or damage due to errors or omissions or to the use or misuse of any information supplied. It is impossible to test all products under all conditions to which they might be subjected in the field. It is therefore the buyer and/or end users' responsibility to test all products under the conditions that duplicate the service conditions prior to installation. All improvements, all specifications are subject to change without prior notice. It is the buyer and/or end users' responsibility to review our complete Terms and Conditions.

© Copyright 2024, HDC. All rights reserved. Dog Tube, Fabriflex, Flexmaster, Novavent, Insul-Vent, Insul-Liner, Novaflex US, The Novaflex Group, Polar Railflex, Triple Lock, U-Lok, Z-Flex, Uni-Chem, Z-Vent, ZQuote, Platinum Flow, Z-MAX, Z-DENS, Z-CENTRIC, Z-LOK, Dry-Release, HDC are ® Registered Trademarks of Flexmaster Canada Limited, Z-Flex (US) Inc and Novaflex Hose.

All materials (texts, trademarks, illustrations, photos, graphics, files, designs, arrangements etc.) contained in this Website are protected by copyright laws, and may not be reproduced, republished, distributed, transmitted, displayed, broadcast or otherwise exploited in any manner without the express prior written permission of The Novaflex Group.

The graphic representation of the products is made for the sole purpose of illustrating the product and is purely indicative.

The Company reserves the rights to implement changes in product specifications without notice and as may be deemed appropriate by the Company for any technical or commercial reason.

Website Design and Development ByRed Leaf Development